Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.
Dans cette société, il y a plein de gens talentueux, surtout les professionnels de l'informatique. Beaucoup de gens IT se battent dans ce domaine pour améliorer l'état de la carrière. Le test ST0-141 est lequel très important dans les tests de Certification Symantec. Pour être qualifié de Symantec, on doit obtenir le passport de test Symantec ST0-141.
Le test Symantec ST0-141 est une examination de techniques professionnelles dans l'Industrie IT. Pass4Test est un site qui peut vous aider à réussir le test Symantec ST0-141 rapidement. Si vous utiliser l'outil de formation avant le test, vous apprendrez tous essences de test Certification Symantec ST0-141.
Le test Symantec ST0-141 est test certification très répandu dans l'industrie IT. Vous pourriez à améliorer votre niveau de vie, l'état dans l'industrie IT, etc. C'est aussi un test très rentable, mais très difficile à réussir.
La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel Symantec ST0-141 peut vous assurer à réussir 100% le test Symantec ST0-141. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.
Vous allez choisir Pass4Test après essayer une partie de Q&A Symantec ST0-141 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification Symantec ST0-141.
Le Certificat de Symantec ST0-141 signifie aussi un nouveau jalon de la carrière, le travail aura une space plus grande à augmenter, et tout le monde dans l'industrie IT sont désireux de l'obtenir. En face d'une grande passion pour le test Certification Symantec ST0-141, le contrariété est le taux très faible à réussir. Bien sûr que l'on ne passe pas le test ST0-141 sans aucun éffort, en même temps, le test de Symantec ST0-141 demande les connaissances bien professionnelles. Le guide d'étude dans le site Pass4Test peut vous fournir un raccourci à réussir le test Symantec ST0-141 et à obtenir le Certificat de ce test. Choisissez le guide d'étude de Pass4Test, vous verrez moins de temps dépensés, moins d'efforts contribués, mais plus de chances à réussir le test. Ça c'est une solution bien rentable pour vous.
Code d'Examen: ST0-141
Nom d'Examen: Symantec (Symantec Backup Exec 2012 Technical Assessment)
Questions et réponses: 150 Q&As
ST0-141 Démo gratuit à télécharger: http://www.pass4test.fr/ST0-141.html
NO.1 For GRT operations, in which two instances must the default path for the TEMP directory specified in
"Symantec Backup Exec 2012 > Configuration and settings > Backup Exec Settings > Granular Recovery
Technology" be modified? (Select two.)
A. when the default path is the system volume
B. when the default path is a mapped drive letter
C. when the default path is NTFS
D. when the default path is FAT32
E. when the default path contains the Windows page file
Answer: A,D
Symantec examen ST0-141 ST0-141 examen ST0-141 examen ST0-141
NO.2 An administrator needs to use the Agent for VMware and Hyper-V to protect a VMware virtual machine
hosting Microsoft Exchange. The administrator needs to restore granular application objects, such as
emails, from the backup sets that are captured from the virtual machine hosting Exchange. Which action
should the administrator take before configuring a backup definition for the virtual machine hosting
Exchange?
A. run the Exchange optimizer utility
B. manually install VMware tools on the virtual machine
C. install the Agent for Windows on the virtual machine hosting Exchange
D. manually truncate Exchange transaction logs
Answer: C
Symantec examen certification ST0-141 ST0-141 ST0-141 ST0-141
NO.3 Which Symantec Backup Exec 2012 troubleshooting tool should an end user use before contacting
Symantec for additional support?
A. VxGather
B. Collect Debug Output
C. Symantec Backup Exec Support Tool
D. BEDiag
Answer: C
certification Symantec certification ST0-141 ST0-141
NO.4 An administrator needs to restore a mailbox to an Exchange 2010 Database Availability Group. Which
server must have an installed Agent for Windows in order to restore from a GRT enabled backup of
Exchange?
A. the Edge Transport server
B. the Active Mailbox server
C. the Client Access server
D. the Passive Mailbox server
Answer: C
certification Symantec ST0-141 examen ST0-141 ST0-141 examen certification ST0-141
NO.5 An administrator needs to restore multiple emails from a GRT enabled backup of Exchange to a file.
Which file format will be created?
A. .MSG
B. .CAB
C. .PST
D. .OST
Answer: C
certification Symantec ST0-141 examen ST0-141 ST0-141 examen certification ST0-141
NO.6 Where are the Symantec Backup Exec Job Log files stored by default?
A. \Program Files\Symantec\Backup Exec
B. \Program Files\Symantec\Backup Exec\Data
C. \Program Files\Symantec\Backup Exec\Logs
D. \Program Files\Symantec\Backup Exec\Log
Answer: B
Symantec certification ST0-141 ST0-141
NO.7 Which Symantec Backup Exec 2012 default global scheduling option allows jobs to be cancelled
without manual intervention?
A. job auto cancel after 'x' hours after its scheduled start time
B. kill the job if it is still running 'x' hours after its scheduled start time
C. terminate the job if it is still running 'x' hours if no data has incremented
D. cancel the job if it is still running 'x' hours after its scheduled start time
Answer: D
Symantec certification ST0-141 ST0-141 ST0-141 ST0-141
NO.8 In Symantec Backup Exec 2012, scheduled convert to virtual jobs can be configured to support which
two sources? (Select two.)
A. all differential backups
B. all full backups
C. most recent snap
D. last incremental with changed block tracking enabled
E. most recent full backup
Answer: B,E
Symantec examen ST0-141 ST0-141 ST0-141 examen certification ST0-141 ST0-141
NO.9 A backup job failed with an access denied error message. Which option in the backup job property can
be used to set the correct permissions?
A. verify credentials
B. user account credentials
C. validate credentials
D. test/edit credentials
Answer: D
certification Symantec certification ST0-141 ST0-141 examen ST0-141 ST0-141
NO.10 An administrator plans to use Symantec Backup Exec 2012 data deduplication capabilities to protect a
Hyper-V environment. The administrator needs to leverage client-side deduplication and image-based
backups of the Hyper-V virtual machines. How does Symantec Backup Exec 2012 accomplish this task?
A. The Agent for Windows installed on the Hyper-V host performs client-side deduplication.
B. Backup data is deduplicated "in flight" during transport to the Symantec Backup Exec server.
C. Hyper-V virtual machines use the .VHD format for virtual disks, which is deduplicated by definition.
D. The PureDisk client installed to the Hyper-V secondary server performs client-side deduplication.
Answer: A
Symantec certification ST0-141 ST0-141
NO.11 Which two behaviors of the Symantec Backup Exec 2012 Agent for Applications and Databases apply
to Microsoft Active Directory? (Select two.)
A. It is installed as a separate add-on component.
B. Windows Active Directory database can be backed up while online.
C. It is a system service that runs on remote Windows servers where active directory is installed.
D. Granular restore of individual Active Directory objects and attributes is unsupported.
E. It requires Agent for Windows to be running on the domain controller.
Answer: B,E
Symantec ST0-141 ST0-141 examen certification ST0-141 ST0-141 examen
NO.12 Which tool should be used to collect debug logs for a failing backup of a remote server.?
A. BEUtility.exe
B. Ramcmd.exe
C. VxMon.exe
D. SGMon.exe
Answer: D
certification Symantec ST0-141 ST0-141 ST0-141 ST0-141 certification ST0-141
NO.13 A job runs with a custom error-handling rule in addition to the default error-handing rule. What will
happen?
A. The custom error-handling rule will apply.
B. The default error-handling rule will apply.
C. The job will fail.
D. The administrator will be prompted to select the rule.
Answer: A
Symantec examen certification ST0-141 ST0-141 examen
NO.14 Which two options are supported by the Checkpoint Restart feature of Symantec Backup Exec 2012?
(Select two.)
A. FAT32 volumes
B. NTFS volumes
C. Linux computers
D. Cluster Shared Volumes (CSV)
E. VSS
Answer: B,E
Symantec examen ST0-141 certification ST0-141
NO.15 A user requests the restore of files from the backup of a different server. The administrator performs a
redirected restore to the user's folder. Which "Restore site list and item level permissions" option must the
administrator select so the user can use the restored files?
A. restore only the NTFS permissions
B. restore files with the NTFS permissions of the destination folder
C. restore files without their NTFS permissions
D. restore files with their NTFS partitions
Answer: C
certification Symantec certification ST0-141 ST0-141
Vous pouvez comparer un peu les Q&As dans les autres sites web que lesquelles de Pass4Test, c'est pas difficile à trouver que la Q&A Symantec ST0-141 est plus complète. Vous pouvez télécharger le démo gratuit à prendre un essai de la qualité de Pass4Test. La raison de la grande couverture des questions et la haute qualité des réponses vient de l'expérience riche et la connaissances professionnelles des experts de Pass4Test. La nouvelle Q&A de Symantec ST0-141 lancée par l'équipe de Pass4Test sont bien populaire par les candidats.
没有评论:
发表评论