Le Certificat Symantec ST0-147 est un passport rêvé par beaucoup de professionnels IT. Le test Symantec ST0-147 est une bonne examination pour les connaissances et techniques professionnelles. Il demande beaucoup de travaux et efforts pour passer le test Symantec ST0-147. Pass4Test est le site qui peut vous aider à économiser le temps et l'effort pour réussir le test Symantec ST0-147 avec plus de possibilités. Si vous êtes intéressé par Pass4Test, vous pouvez télécharger la partie gratuite de Q&A Symantec ST0-147 pour prendre un essai.
Un bon choix de l'outil à se former est le point essentiel à passer le test Symantec ST0-147, et les documentations à propos de rechercher le test Symantec ST0-147 est toujours une part plus importante pendant la préparation de test Certification. Les Q&As offertes par les experts de Pass4Test sont presque même que les tests réels. Pass4Test est un site web particulièrement en apportant les facilités aux gens qui veulent passer le test Certification.
Le test simulation Symantec ST0-147 sorti par les experts de Pass4Test est bien proche du test réel. Nous sommes confiant sur notre produit qui vous permet à réussir le test Symantec ST0-147 à la première fois. Si vous ne passe pas le test, votre argent sera tout rendu.
Le Pass4Test est un site qui peut offrir les facilités aux candidats et aider les candidats à réaliser leurs rêve. Si vous êtes souci de votre test Certification, Pass4Test peut vous rendre heureux. La haute précision et la grande couverture de la Q&A de Pass4Test vous aidera pendant la préparation de test. Vous n'aurez aucune raison de regretter parce que Pass4Test réalisera votre rêve.
La Q&A Symantec ST0-147 est étudiée par les experts de Pass4Test qui font tous effort en profitant leurs connaissances professionnelles. La Q&A de Pass4Test est ciblée aux candidats de test IT Certification. Vous voyez peut-être les Q&As similaires dansn les autres site web, mais il n'y a que Pass4Test d'avoir le guide d'étude plus complet. C'est le meilleur choix à s'assurer le succès de test Certification Symantec ST0-147.
Code d'Examen: ST0-147
Nom d'Examen: Symantec (Veritas Cluster Server 6.0 for Unix Technical Assessment )
Questions et réponses: 108 Q&As
ST0-147 Démo gratuit à télécharger: http://www.pass4test.fr/ST0-147.html
NO.1 Which two actions must be taken to upgrade an application under Veritas Cluster Server control?
(Select two.)
A. verify that the application agent supports the new version
B. verify that the new version is supported with haagent verify
C. freeze the application service group
D. freeze the application resources
E. stop the application agent on all systems
Answer: A,C
Symantec examen certification ST0-147 certification ST0-147 ST0-147
NO.2 You have removed a system from a running Veritas Cluster Server cluster so that the cluster now only
has seven nodes. You need to ensure the cluster will start successfully after a complete cluster shutdown.
Which line should be in the /etc/gabtab file to successfully start the cluster?
A. gabconfig -c -n 7
B. clust start seed=7
C. gabconfig start seed=7
D. clust -c -n 7
Answer: A
Symantec examen certification ST0-147 certification ST0-147 ST0-147 certification ST0-147 ST0-147 examen
NO.3 The administrator of a four-node Veritas cluster has configured notifications as highly available for all
notification methods. How many notification manager resources are running when all nodes are
considered?
A. 1
B. 2
C. 4
D. 8
Answer: A
Symantec certification ST0-147 ST0-147 examen ST0-147 examen ST0-147 ST0-147
NO.4 Which two actions can be taken to determine whether an application clustered with Veritas Cluster
Server (VCS) has been successfully started or stopped? (Select two.)
A. examine the online log file
B. examine the engine log file
C. view the Security Log from the VCS Java GUI
D. view the Log Desk from the VCS Java GUI
E. view the Application_A.log file
Answer: B,D
Symantec ST0-147 ST0-147 certification ST0-147 ST0-147 ST0-147
NO.5 What is the first step when upgrading the operating system on a single node in a running multi-node
Veritas Cluster Server (VCS) cluster?
A. offline service groups on the node
B. freeze the service groups
C. migrate parallel service groups
D. shut down VCS on all nodes
Answer: A
Symantec examen ST0-147 examen certification ST0-147 ST0-147 ST0-147
NO.6 While Veritas Cluster Server supports nodes in a cluster using different hardware or operating system
versions, this is potentially undesirable for which two reasons? (Select two.)
A. user security
B. inability to handle load on failover
C. cluster upgrades
D. operational complexity
E. network connectivity
Answer: B,D
Symantec ST0-147 certification ST0-147 ST0-147 examen ST0-147
NO.7 An administrator is manually adding a node named sym3 to an existing two-node cluster. What must
be done after installing Veritas Cluster Server and configuring cluster communications on the new node?
A. run hastart -add sym3 on any node
B. run hasys -force sym3 on the new node
C. run haclus -addnode sym3 on the new node
D. run hastart on the new node
Answer: D
Symantec certification ST0-147 ST0-147 examen certification ST0-147
NO.8 An additional email address was added to the Veritas Cluster Server notifier resource without any other
actions being taken. All but one user is receiving notifications. How can this problem be solved?
A. refresh the mailbox of the impacted user
B. restart the notifier resource
C. restart the SNMP daemon
D. restart the HAD daemon
Answer: B
Symantec certification ST0-147 ST0-147 ST0-147 examen ST0-147 ST0-147
NO.9 Which two resource attributes need to be correctly set to prevent an unplanned outage due to an
improper configuration that might cause a fault during the online process of the new resource? (Select
two.)
A. AutoStart
B. Critical
C. Enabled
D. AutoDisabled
E. MonitorOnly
Answer: B,C
Symantec ST0-147 examen ST0-147 certification ST0-147 ST0-147
NO.10 In a four-node cluster configuration, main.cf is modified to remove one of the four nodes. That node is
decommissioned, and the remaining cluster configuration is unchanged. A power failure causes all three
remaining nodes to shut down. What happens when all three nodes are powered on.?
A. The three nodes form a cluster.
B. Veritas Cluster Server will need manual intervention to come online.
C. LLT will fail because the fourth node is in the llthosts.
D. Veritas Cluster Server will go into ADMIN_WAIT.
Answer: B
Symantec certification ST0-147 certification ST0-147
NO.11 One of the three coordinator disks needs to be repurposed as a data disk. What can the administrator
do to accommodate growth in the data center and still provide SCSI-3 I/O fencing?
A. use gatekeeper LUNs to provide additional coordinator disks
B. replace all coordinator disks with Coordination Point servers
C. remove a coordinator disk from the cluster and replace it with a Coordination Point server
D. use compressed disks to double the space available for coordinator disks to enable future growth
Answer: C
certification Symantec ST0-147 examen ST0-147 certification ST0-147 ST0-147
NO.12 Which two triggers can only be enabled at the resource level? (Select two.)
A. Resrestart
B. Resadminwait
C. Resfault
D. Resstatechange
E. resnotoff
Answer: B,E
Symantec examen ST0-147 certification ST0-147
NO.13 Which type of resources are considered by Veritas Cluster Server when determining whether a service
group is online?
A. OnOnly
B. OnOff
C. Persistent
D. None
Answer: B
Symantec certification ST0-147 certification ST0-147
NO.14 Refer to the exhibit.
An administrator has configured preferred fencing. Cluster communication breaks and separates sym1
from the other cluster nodes. Which node(s) will survive the fencing race?
A. sym1 only
B. sym2 only
C. sym3 only
D. both sym2 and sym3
Answer: D
Symantec examen certification ST0-147 certification ST0-147 certification ST0-147 certification ST0-147 ST0-147
NO.15 When architecting Coordination Point (CP) server into a Veritas Cluster Server (VCS) environment,
what should be done to ensure the CP service remains online?
A. configure multiple CP server instances on the same node
B. configure CP server as a resource in a VCS cluster
C. ensure that the CP server is backed up regularly
D. ensure that the CP server is on a reliable network
Answer: B
certification Symantec ST0-147 ST0-147 ST0-147 ST0-147
Pass4Test vous promet de vous aider à passer le test Symantec ST0-147, vous pouvez télécharger maintenant les Q&As partielles de test Symantec ST0-147 en ligne. Il y a encore la mise à jour gratuite pendant un an pour vous. Si vous malheureusement rater le test, votre argent sera 100% rendu.
没有评论:
发表评论