Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.
Quand vous hésitez même à choisir Pass4Test, le démo gratuit dans le site Pass4Test est disponible pour vous à essayer avant d'acheter. Nos démos vous feront confiant à choisir Pass4Test. Pass4Test est votre meilleur choix à passer l'examen de Certification Microsoft 70-681, et aussi une meilleure assurance du succès du test 70-681. Vous choisissez Pass4Test, vous choisissez le succès.
Beaucoup de gens trouvent difficile à passer le test Microsoft 70-681, c'est juste parce que ils n'ont pas bien choisi une bonne Q&A. Vous penserez que le test Microsoft 70-681 n'est pas du tout autant dur que l'imaginer. Le produit de Pass4Test non seulement comprend les Q&As qui sont impressionnées par sa grande couverture des Questions, mais aussi le service en ligne et le service après vendre.
Le produit de Pass4Test peut assurer les candidats à réussir le test Microsoft 70-681 à la première fois, mais aussi offrir la mise à jour gratuite pendant un an, les clients peuvent recevoir les ressources plus nouvelles. Pass4Test n'est pas seulement un site, mais aussi un bon centre de service.
Avec la version plus nouvelle de Q&A Microsoft 70-681, réussir le test Microsoft 70-681 n'est plus un rêve très loin pour vous. Pass4Test peut vous aider à réaliser ce rêve. Le test simualtion de Pass4Test est bien proche du test réel. Vous aurez l'assurance à réussir le test avec le guide de Pass4Test. Voilà, le succès est juste près de vous.
Code d'Examen: 70-681
Nom d'Examen: Microsoft (TS: Windows 7 and Office 2010, Deploying)
Questions et réponses: 85 Q&As
70-681 Démo gratuit à télécharger: http://www.pass4test.fr/70-681.html
NO.1 You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows
Server 2008 R2.
You plan to use a server to deploy Windows 7 by using Lite Touch Installation (LTI).
You need to ensure that this server has the required software for deploying Windows 7 by using LTI. You
install Microsoft Deployment Toolkit (MDT) 2010.
What should you install next?
A. Microsoft Application Compatibility Toolkit
B. System Center Configuration Manager
C. Windows Automated Installation Kit
D. Windows Deployment Services
Answer: C
Microsoft examen 70-681 examen 70-681
NO.2 Your network has one subnet for servers and one subnet for client computers. The subnets are
separated by a router. In the server subnet, Server1 is a Windows Server 2008 R2 server that runs DHCP
and DNS.
Your deployment infrastructure is configured to allow computers in the client computer subnet to boot by
using PXE. However, client computers that attempt to use PXE to boot are not able to connect to the
deployment infrastructure.
You need to ensure that client computers are able to connect to the deployment infrastructure by using
PXE.
What should you do?
A. Configure DHCP reservations.
B. Configure an IP Helper Address on the router.
C. Place a DNS server in the client computer subnet.
D. Run the netsh dhcp add server Server1 command.
Answer: B
Microsoft examen 70-681 certification 70-681 70-681 70-681 examen certification 70-681
NO.3 You have a single-domain Active Directory Domain Services (AD DS) forest. The network includes a
Windows Deployment Services (WDS) server and a separate DHCP server. You set up a multicast
transmission of Windows 7 and deploy Windows 7 on 100 new client computers via multicast. The
multicast transmission average speed is 512 KBps.
You deploy Windows 7 on an additional 50 new client computers and 2 older client computers via
multicast. The multicast transmission average speed is 56 KBps. You remove the older client computers
and restart the multicast transmission. The multicast transmission average speed is again 512 KBps.
You need to ensure that Windows 7 is deployed on all client computers via multicast and that older client
computers do not decrease the multicast average transmission speed for new client computers.
What should you do?
A. Configure multicast to separate clients into slow, medium, and fast sessions.
B. Configure multicast to automatically disconnect clients below 128 KBps.
C. Configure Multicast Address Dynamic Client Allocation Protocol (MADCAP).
D. Configure the PXE response delay to 0 seconds.
Answer: A
Microsoft certification 70-681 70-681 70-681 examen 70-681 examen
NO.4 Your company uses Key Management Service (KMS) for Microsoft Volume Activation. You have a
Windows 7 image, which will be deployed to the company s client computers.
You deploy the image to a client computer as a test. When you log on to the client computer, a warning
states that the grace period for activation has expired.
You need to prevent the grace period from expiring before the image is deployed to the client computers.
Which command should you run?
A. Sysprep /audit
B. Sysprep /generalize
C. slmgr.vbs /ckms
D. slmgr.vbs /cpky
Answer: B
certification Microsoft 70-681 examen certification 70-681 70-681 examen
NO.5 You have a single-domain Active Directory Domain Services (AD DS) forest with two domain controllers
that run Windows Server 2008 R2. Your network consists of two subnets. All client computers are located
in one subnet. Both the DHCP server and the Windows Deployment Services (WDS) server are located in
the other subnet.
You need to ensure that client computers can be deployed over the network by using WDS.
What should you do?
A. Forward all client DHCP broadcast packets to only the DHCP server.
B. Forward all client DHCP broadcast packets to only the WDS server.
C. Forward all client DHCP broadcast packets to both the DHCP server and the WDS server.
D. Add a DNS service location (SRV) record for port 60 that is pointed toward the WDS server.
Answer: C
Microsoft 70-681 examen certification 70-681
NO.6 You are using Windows Deployment Services (WDS) to deploy Windows 7 to your company s client
computers. All servers in your network run Windows Server 2008 R2. The WDS server and the DHCP
server are running on the same computer.
You need to ensure that the client computers are able to connect to the WDS server by using PXE.
What should you do first?
A. Add option 60 to the DHCP scope.
B. Add option 64 to the DHCP scope.
C. Block WDS from listening on port 60.
D. Block WDS from listening on port 64.
Answer: A
Microsoft examen certification 70-681 70-681 examen
NO.7 All client computers in your company run Volume License editions of Windows 7 and Office 2010. All
computers in the company are activated by using Key Management Service (KMS) hosts.
The company is opening a new branch office. The new branch office will not have access to the corporate
network or to the Internet for at least eight months. Windows 7 and Office 2010 have been deployed on
the client computers for the new branch office, but are not yet activated and have not been shipped.
You need to ensure that users in the new branch office will be able to use Windows 7 and Office 2010
without receiving prompts for activation.
What should you do to the new branch office client computers?
A. Enter Full Packaged Product (FPP) license keys for Windows 7 and Office 2010.
B. Enter Original Equipment Manufacturer (OEM) license keys for Windows 7 and Office 2010.
C. Activate Windows 7 and Office 2010 by using Multiple Activation Key (MAK) licenses.
D. Activate Windows 7 and Office 2010 by using the KMS hosts.
Answer: C
Microsoft examen certification 70-681 70-681 examen 70-681 examen certification 70-681
NO.8 You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows
Server 2008 R2.
You install Microsoft Deployment Toolkit (MDT) 2010 on a server named Server1. You install Microsoft
SQL Server 2008 on a server named Server2. You create an MDT deployment database for
location-specific network installations of Windows 7. Server1 and Server2 run Internet Information
Services (IIS).
You need to ensure that the MDT deployment database supports Windows integrated security from the
Windows Preinstallation Environment (Windows PE).
What should you do?
A. Create a shared folder on Server1.
B. Create a shared folder on Server2.
C. Enable Integrated Windows authentication in IIS on Server1.
D. Enable Integrated Windows authentication in IIS on Server2.
Answer: B
certification Microsoft certification 70-681 70-681
Pass4Test est aussi un site d'offrir la ressource des connaissances pour le test Certification IT. Selon les Feedbacks venus de gens qui ont untilié les produits de Pass4Test, Pass4Test est un site fiable comme l'outil de se former. Les Q&As offertes par Pass4Test sont bien précises. Les experts de Pass4Test mettent à jour nos documentations de formation de temps de temps.
没有评论:
发表评论